Categories
How to manage my VPS

How to setup ipv6 in my HOSTDARE vps?

Internet Protocol version 6 (IPv6) is the latest version of Internet Protocol(IP),a network layer protocol that allows communication to take place over the network. As the world Internet is running out of IPv4 addresses, we will need to migrate towards IPv6.IPv6 address is 128 bit long and provides a large number of address pools to choose from theoretically allowing 2128, or approximately 3.4×1038 addresses. It is more secure as it built-in IPSec protocol.

IPv6 or Internet Protocol Version 6 is  IPv6 was designed by Internet Engineering Task Force (IETF) in December 1998 to deal with the future problems of IPv4 address exhaustion due to the global exponentially growing internet users.

You can find your ipv6 address from vps panel ,

In case you do not see your IPv6 in vps panel, you will need to open a support ticket . You must setup ipv6 manually as static

Prefix length /64

Netmask /64

Gateway :

2607:fcd0:100:b101::1  or

2607:fcd0:100:e::1 or

2607:fcd0:100:b100::1

( for example if your assigned ipv6 is 2607:fcd0:100:b100:0000:0000:92fa:ac1a, then gateway is 2607:fcd0:100:b100::1 )

Use the following guides to set up ipv6 in your hostdare vpses .

centos 7/8

ubuntu https://www.cyberciti.biz/faq/ubuntu-ipv6-networking-configuration/

Categories
How to manage my VPS

How to use vnc viewer in my VPS ?

Many a time when installing linux or windows OS, you will need to use vnc to finish the installation and setup process.

1) First login to https://vps.hostdare.com , you will get login for this in the VPS setup welcome email. 

Please note that vnc at bill.hostdare.com may not be accessible

vps login panel

Click on list vps on left side.

If you have multiple vps, find your correct vps , click on right blue arrow mark.

2) Click on VNC icon

3) Click on HTML 5 VNC client

4) You will have now access to VNC client as below

 

Categories
How to manage my VPS

How to change windows OS system language ?

Many people may want to change the language of their windows system .

Categories
Billing

How to register for Hostdare.com at billing panel ?

First of all, we would like to thank your decision to register at Hostdare.com.We provide Virtual Private Servers, VPN solutions, shared hosting, IaaS (Infrastructure-as-a-Service), Cloud solutions. We are maintained by a team with experience in managed services, data center, and network operations.

To register at our website, please visit this link https://manage.hostdare.com/register.php

 

Kindly note , you must use your real name and address , we do not allow fake name/address.

Categories
How to manage my VPS

My IP address is banned by GFW . What should I do now ?

If you have new vps within our 3 days refund period and you find that you received a blocked IP when your vps was setup , we will give you a new working tested IP for free  . Note that this will not be treated for refund cases. Just open a support ticket  , click here

If you have vpses older, we request you to wait 2/3 weeks before ip change or new ip get blocked too .You need to change your VPs/proxy software but note that GFW can detect most software these days. If possible also contact your isp to get the ip removed from the gfw firewall .

If we change IP immediately , it will get blocked again and we will run out of ips. Mind you this is not our network issue , it is a block by the Chinese government firewall.

Cost of ip change in case of old vpses is 3 USD.

Usually, IPs are banned during any important events in china . To prevent your IPs from getting blocked, you can shut down the vps before the start of the event and boot it up only after the event passed, you can also contact your friends in forums,blogs and instant messages apps to be updated of such upcoming events .

You can test if your IPs or IP port is banned at the websites below

https://www.vps234.com/ipchecker/

https://www.ping.cn/ping

http://ping.pe/

http://port.ping.pe/

Categories
How to manage my VPS

How to reinstall Operating system in my vps ?

To login to our vps panel login , please visit https://vps.hostdare.com

vps login panel

Click on list vps on left side.

If you have multiple vps, find your correct vps , click on right blue arrow mark.

 

Then click on the “Install” button and select Operating System (OS) and its available version from the dropdown.

To generate the password, click the “Key”. Then click the “Reinstall button “. Make sure you have copied the root password. We recommend you enable key-based authentication and disable password-based authetication.

 

Categories
How to manage my VPS

How to manage my vps ?

To manage your vps panel login , please visit https://vps.hostdare.com

vps login panel

Categories
How to manage my VPS

How to login hostdare vps panel ?

To login to our vps panel login , please visit https://vps.hostdare.com

vps login panel

Categories
How to manage my VPS

How is vps bandwidth counted ?

Bandwidth is counted and reset on date of purchase/vps setup on monthly basis . For example, if the VPS is setup/resetup on 15th Jan, the bandwidth calculation will be from 15 Jan to 14th Feb midnight. Yearly vpses bandwidth are also reset on monthly basis . Our time zone is Los Angeles , Usa for the purpose of reset of bandwidth .

Both in+out (i.e upload+download) bandwidth is calculated .

Currently,we do not offer bandwidth reset .If you want more bandwidth, please upgrade your vps plan to more available bandwidth plan.

To find your vps bandwidth , login to vps.hostdare.com .

Click on list vps on left side.

If you have multiple vps, find your correct vps , click on right blue arrow mark.

Then go Graphs section to view your bandwidth usage.

bandwidth graphs